«-- Odds 'n Sods: | Main | Letter Re: Questions from A Not-Quite Convinced Reader --»
Two Letters Re: Disseminating Local News and Information in a Grid-Down Societal Collapse
Jim,
I think Brian raises a good question and your suggestion about using manual
typewriters and mimeograph machines is a great idea. Here's another one.
While watching the the first season of Jericho DVDs,
I noticed that in an episode titled "Black
Jack" some of the characters went to a barter fair called Black Jack.
They had to travel 200 miles to get to this town. The town's fairgrounds
were used as a barter fair location and in the middle (I assume the middle)
was a tall board with a platform and a big roll of newspaper on the top.
A writer standing on the platform would receive news from various sources
and pull down the paper and write the news on it so everyone could see. I
was thinking if rolls of paper are not available one could use black boards
screwed together. If "black board paint" is available they could
paint some 4' x 8' sheets of plywood. A place like this could become
a very important gathering place for the local community to exchange news,
barter for goods and bring some level of normal life back to folks post TEOTWAWKI.
Just My Humble Opinion. - Larry in Kansas
Dear Jim;
As a former offset press operator with an interest in Christian missions and
the underground Church, I've spent considerable time in researching simple
printing methods. There are multiple methods that are suitable for short-run
print production, though many take a degree of skill and a bit of patience
to produce.
An excellent reference book for those interested in the manual printing arts
is "The Alternative Printing Handbook," (ISBN 014046509X),
published by Penguin, but now out of print. Used copies are available on Amazon,
though
it's listed there as "The Art of Printing by Hand." It covers
multiple printing methods for the do-it-yourself, small-scale printer. I'd
like to touch
on methods that require no power and are accessible to anyone with a little
time, patience and a desire to get the word out.
You've already mentioned stencil duplicating, which I have used in the past.
The Wikipedia article you linked to is an excellent introduction to the theory
and history, but doesn't contain much on actual process. For someone dealing
with printed matter containing great quantities of text, this is one of the
easiest methods to use. One of the commercial machines would be handy to have,
but not required, as a simple flatbed duplicator can be constructed out of
basic materials found in most homes. One benefit of many commercial units is
that they are hand-cranked, ideal for a grid-down situation. Some electric
units also have a hand-crank option as well, giving the best of both worlds.
If you go this route, you will need a supply of blank stencils and the thick
stencil ink, as well as a typewriter.
Another method, commonly used today for signs and fabric, is screen printing.
Again, simple screen printing equipment can be made at home from readily-available
materials and the process is not complicated. However, due to the screens used,
it is not suitable for small type, but it is a great choice for handbills and
posters. See some samples of DIY screen printing at this
Instructables page and
at
this ThreadBanger page. Of course,
you don't have to build it all yourself if you don't want to. Many art supply
and craft stores offer screen printing kits for beginners at very reasonable
prices.
Relief printing uses involves carving a reverse image into a wooden block,
linoleum, or other substance that can be carved, inking the block and pressing
paper into the wet ink. Though a time-tested method that requires little in
the way
of specialized tools, it has many limitations. It is time-consuming to create
the block and takes a steady hand. Small type is difficult, if not impossible.
Plus, the
difficulty of working in reverse is quite challenging.
A form of relief printing that is within reach of the average person and allows
for legible text is rubber stamping. Several manufacturers produce "make
your own text" rubber stamp kits that will allow you to produce small
blocks of text. It's similar to the moveable type pioneered by Gutenberg centuries
ago, using rubber instead of metal type. The biggest drawback is that producing
anything more than a few sentences involves setting the type in a small block,
stamping out however many copies you need, removing the type, setting the next
block, stamping that, and then repeating... again. It's time-consuming and
tedious work, but for the patient person, it's better than nothing, cheap to
acquire and requires no skills to use. The drudgery involved is also likely
to do much to make your writing concise and to the point! Interestingly, the
large kits that I would recommend seem to only be offered in the UK. However,
eBay is your friend to obtain them.
[Traditional ] letterpress is also an option, but as an older technology, the
equipment is hard to come by, and much in demand by artisans who use it for
printing and
embossing.
Spirit duplication ("ditto" machines) use a dye sheet as a master,
which can be typed or hand-written. The dye is released by a solvent and transferred
to a sheet of paper. If you recall duplicated sheets in purple ink from your
school days, those sheets were made with a spirit duplicator. Used machines
can be found on eBay or from time to time on Craig's
List. Look for a hand-cranked
model. If you choose this method, you'll need to lay in a supply of the master
dye sheets, as well as the liquid "spirits."
There are other methods that might be investigated by the curious:
Gocco
Hectography
History of Duplication Machines
The biggest drawback to most of these print methods is that the ones that are
best for text tend to require consumables that will be difficult or impossible
to replace in a long-term disruption. Since some are older, near-obsolete methods,
local sources of supplies are unlikely and may be pricey via mail-order. Even
if you have a functioning print method, the availability of paper may also
become an issue. Despite these challenges, familiarity with printing methods
opens the door to improvisation at a later date: knowledge is power! As inspiration,
consider Khristianin, an underground publisher in Soviet-era Russia, which
created their first hand-operated offset printing press with gears from a bicycle
and motorcycle and rollers taken from a washing machine. Ink was derived from
burnt rubber boots and boiled moss, yet their first publication was of the
entire New Testament. If such a work could be done in secret under one of the
most oppressive modern regimes, there is no reason that it could not be repeated
should the need arise.
Remember: "Freedom of the press belongs to the man who owns one."
For
the Kingdom, - Jason R.
